Библиотека моделей
Bad_ Usb_ Enclosure
автор: dorukerel39.1.1
БесплатноCC BYSketchfab
Custom 3D print enclosure designed for my open-source "Rubber-Ducky-ESP32" project. I engineered this highly compact, flash drive form factor shell to house an ESP32-S3 microcontroller and an integrated MicroSD card module. The modeling focuses on extremely tight dimensional tolerances for exact USB
Эта модель размещена на Sketchfab. Файлы скачиваются оттуда на условиях указанной лицензии.
| Лицензия | CC BY |
|---|---|
| Источник | Sketchfab |
| Автор | dorukerel39.1.1 |
| Указание авторства | dorukerel39.1.1 on Sketchfab · CC-BY 4.0 (attribution required) · Attribution required |
| Теги | 3d-printing, esp32, mechanical-keyboard, pcb-enclosure, macropad, hardware-design |
Custom 3D print enclosure designed for my open-source "Rubber-Ducky-ESP32" project. I engineered this highly compact, flash drive form factor shell to house an ESP32-S3 microcontroller and an integrated MicroSD card module. The modeling focuses on extremely tight dimensional tolerances for exact USB connector alignment and structural integrity. This enclosure serves as the physical disguise for a custom USB HID emulation tool capable of executing DuckyScript payloads with keyboard and mouse injection. Full firmware, 3D models, and schematics are documented on my GitHub.
Публикуйте свои модели
Загружайте файлы STL, 3MF или OBJ из приложения. Каждая загрузка проверяется до публикации, а авторы получают 80% от каждой платной продажи.