디자인 라이브러리
Bad_ Usb_ Enclosure
dorukerel39.1.1 제작
무료CC BYSketchfab
Custom 3D print enclosure designed for my open-source "Rubber-Ducky-ESP32" project. I engineered this highly compact, flash drive form factor shell to house an ESP32-S3 microcontroller and an integrated MicroSD card module. The modeling focuses on extremely tight dimensional tolerances for exact USB
이 디자인은 Sketchfab에서 호스팅됩니다. 파일은 표시된 라이선스에 따라 해당 사이트에서 다운로드됩니다.
| 라이선스 | CC BY |
|---|---|
| 출처 | Sketchfab |
| 디자이너 | dorukerel39.1.1 |
| 저작자 표시 | dorukerel39.1.1 on Sketchfab · CC-BY 4.0 (attribution required) · Attribution required |
| 태그 | 3d-printing, esp32, mechanical-keyboard, pcb-enclosure, macropad, hardware-design |
Custom 3D print enclosure designed for my open-source "Rubber-Ducky-ESP32" project. I engineered this highly compact, flash drive form factor shell to house an ESP32-S3 microcontroller and an integrated MicroSD card module. The modeling focuses on extremely tight dimensional tolerances for exact USB connector alignment and structural integrity. This enclosure serves as the physical disguise for a custom USB HID emulation tool capable of executing DuckyScript payloads with keyboard and mouse injection. Full firmware, 3D models, and schematics are documented on my GitHub.
디자인을 공개하세요
앱에서 STL, 3MF 또는 OBJ 파일을 업로드하세요. 모든 업로드는 여기에 표시되기 전에 검토되며, 유료 판매 금액의 80%는 디자이너에게 돌아갑니다.