The Spool List
Sluitgewicht | nested cup weights (...- 1650)

Biblioteka projektów

Sluitgewicht | nested cup weights (...- 1650)

autor: Archeologiemuseum Huis van Hilde

Za darmoCC BY-SASketchfab

*This nested cup weight — in Dutch also known as a "sluitgewicht" or "pijlgewicht" — has seven cups and one small, solid weight (the disc) fitting together precisely. The lid has a clasp and handle, and bears the maker's mark. The set is also officially assayed: the outer cup carries, inside, the Am

Ten projekt jest hostowany w Sketchfab. Pliki pobiera się stamtąd, na podanej licencji.

LicencjaCC BY-SA
ŹródłoSketchfab
ProjektantArcheologiemuseum Huis van Hilde
Uznanie autorstwaArcheologiemuseum Huis van Hilde on Sketchfab · CC-BY-SA 4.0 (attribution + share-alike) · Attribution required
Tagishipwreck, weight, weights, maritime-archaeology, maritimearchaeology, museumsonsketchfab, 17th-century, museumcollection, shipwreck-archaeology-photogrammetry, northsea, shipwreck-archaeology, texel
*This nested cup weight — in Dutch also known as a "sluitgewicht" or "pijlgewicht" — has seven cups and one small, solid weight (the disc) fitting together precisely. The lid has a clasp and handle, and bears the maker's mark. The set is also officially assayed: the outer cup carries, inside, the Amsterdam coat of arms flanked by letters I and A. The second cup bears the same mark plus a separate date letter E; the third is marked the same way. The remaining cups and the disc carry only the Amsterdam arms. These marks are attributed to assay master Jan Adriaensz van Keulen, active (in or before) 1632–1683. Letter E likely denotes 1644. Together, the pieces weigh half an Amsterdam pound: 210 grams. Found in shipwreck BZN17, also known as Palmwood Wreck, in the Wadden Sea near Texel.* Afmetingen-measurements (cm): 4.5/3.7/4.1 <a href="https://hdl.handle.net/21.12153/obj65306">Collectie Archeologiemuseum Huis van Hilde PNH 5377-063</a> *Model by Archeologiemuseum Huis van Hilde (Kees Zwaan).*

Wszystkie projekty

Opublikuj swoje projekty

Prześlij pliki STL, 3MF lub OBJ w aplikacji. Każdy plik jest sprawdzany, zanim pojawi się tutaj, a projektanci zachowują 80% z każdej płatnej sprzedaży.

Pobierz aplikację