The Spool List
Sluitgewicht | nested cup weights (...- 1650)

Designbibliothek

Sluitgewicht | nested cup weights (...- 1650)

von Archeologiemuseum Huis van Hilde

KostenlosCC BY-SASketchfab

*This nested cup weight — in Dutch also known as a "sluitgewicht" or "pijlgewicht" — has seven cups and one small, solid weight (the disc) fitting together precisely. The lid has a clasp and handle, and bears the maker's mark. The set is also officially assayed: the outer cup carries, inside, the Am

Dieses Design wird auf Sketchfab gehostet. Die Dateien werden dort unter der angegebenen Lizenz heruntergeladen.

LizenzCC BY-SA
QuelleSketchfab
DesignerArcheologiemuseum Huis van Hilde
NamensnennungArcheologiemuseum Huis van Hilde on Sketchfab · CC-BY-SA 4.0 (attribution + share-alike) · Attribution required
Tagsshipwreck, weight, weights, maritime-archaeology, maritimearchaeology, museumsonsketchfab, 17th-century, museumcollection, shipwreck-archaeology-photogrammetry, northsea, shipwreck-archaeology, texel
*This nested cup weight — in Dutch also known as a "sluitgewicht" or "pijlgewicht" — has seven cups and one small, solid weight (the disc) fitting together precisely. The lid has a clasp and handle, and bears the maker's mark. The set is also officially assayed: the outer cup carries, inside, the Amsterdam coat of arms flanked by letters I and A. The second cup bears the same mark plus a separate date letter E; the third is marked the same way. The remaining cups and the disc carry only the Amsterdam arms. These marks are attributed to assay master Jan Adriaensz van Keulen, active (in or before) 1632–1683. Letter E likely denotes 1644. Together, the pieces weigh half an Amsterdam pound: 210 grams. Found in shipwreck BZN17, also known as Palmwood Wreck, in the Wadden Sea near Texel.* Afmetingen-measurements (cm): 4.5/3.7/4.1 <a href="https://hdl.handle.net/21.12153/obj65306">Collectie Archeologiemuseum Huis van Hilde PNH 5377-063</a> *Model by Archeologiemuseum Huis van Hilde (Kees Zwaan).*

Alle Designs

Veröffentliche deine Designs

Lade STL-, 3MF- oder OBJ-Dateien in der App hoch. Jeder Upload wird geprüft, bevor er hier erscheint, und Designer behalten 80 % jedes bezahlten Verkaufs.

App holen