設計庫
Marc - Moto Clement - 1902
作者：TG13730
免費CC BYSketchfab
Clément ranks among the true French pioneers of the motorcycle; this specific model was produced around 1902. The engine features an automatic intake valve and an overhead exhaust valve. The large external flywheel doubles as a pulley for the direct drive—via a twisted leather belt—to the rear wheel
此設計託管於 Sketchfab。檔案需依所示授權從該網站下載。
| 授權 | CC BY |
|---|---|
| 來源 | Sketchfab |
| 設計者 | TG13730 |
| 姓名標示 | TG13730 on Sketchfab · CC-BY 4.0 (attribution required) · Attribution required |
| 標籤 | bird, motorbike, motorcycles, low-poly, 6tmd-modelling, clement_1902, old_motorbike |
Clément ranks among the true French pioneers of the motorcycle; this specific model was produced around 1902. The engine features an automatic intake valve and an overhead exhaust valve. The large external flywheel doubles as a pulley for the direct drive—via a twisted leather belt—to the rear wheel. The seat tube incorporates an adjustable belt tensioner. A spray-type carburetor handles mixture metering, while a throttle valve is fitted in the intake manifold. Ignition is provided by a trembler coil and battery, neatly housed in a leather satchel. The tank features two filler caps: one for gasoline and the other for oil. It also contains a manual pump for injecting pressurized oil into the crankcase. The front brake consists of a rubber pad that presses against the tire, while the rear wheel is slowed by a rim brake. These machines were widespread in the early 20th century; some were sold as complete vehicles.
發布你的設計
在 App 中上傳 STL、3MF 或 OBJ 檔案。每個上傳在出現在這裡之前都會經過審核，設計者可獲得每筆付費銷售的 80%。