设计库
SUZUKI IGNIS BODY SHELL
作者：Actioncars3d
免费CC BYSketchfab
Suzuki Ignis 1:10 Scale RC Body Shell (3D Printable STL) This custom Suzuki Ignis body shell is designed with clean topology and optimized wall sections specifically for 3D printing and RC mounting. Scale & Technical Specifications Scale: 1:10 Height: 137mm Length: ~370 mm Width: ~171 mm Wall thic
此设计托管在 Sketchfab。文件需从该网站按所示许可证下载。
| 许可证 | CC BY |
|---|---|
| 来源 | Sketchfab |
| 设计者 | Actioncars3d |
| 署名 | Actioncars3d on Sketchfab · CC-BY 4.0 (attribution required) · Attribution required |
| 标签 | rc, printable, toycar, rccar, bodyshell, suzukiignis, rcshell |
Suzuki Ignis 1:10 Scale RC Body Shell (3D Printable STL)
This custom Suzuki Ignis body shell is designed with clean topology and optimized wall sections specifically for 3D printing and RC mounting.
Scale & Technical Specifications
Scale: 1:10
Height: 137mm
Length: ~370 mm
Width: ~171 mm
Wall thickness: ~2.5 mm
M-Chassis & Custom Friendly: Perfectly sized for short wheelbase / Mini (M-chassis) setups or custom RC builds.
Layer Height: 0.2 mm (0.12–0.16 mm for smoother exterior resolution)
Infill: 15% – 20% (Gyroid or Grid recommended for durability)
Wall Loops / Perimeter: 3 to 4 walls for maximum structural rigidity against crashes
Material: PETG or ABS/ASA (Recommended for impact resistance); PLA (Great for display or light driving)
Supports: Tree supports enabled (touching build plate)
Commercial Rights: Re-distribution or sale of digital files is strictly prohibited. (If offering physical prints, specify your commercial terms here).
https://buymeacoffee.com/actioncars3d
发布你的设计
在应用中上传 STL、3MF 或 OBJ 文件。每个上传在出现在这里之前都会经过审核，设计者可获得每笔付费销售的 80%。