디자인 라이브러리
SUZUKI IGNIS BODY SHELL
Actioncars3d 제작
무료CC BYSketchfab
Suzuki Ignis 1:10 Scale RC Body Shell (3D Printable STL) This custom Suzuki Ignis body shell is designed with clean topology and optimized wall sections specifically for 3D printing and RC mounting. Scale & Technical Specifications Scale: 1:10 Height: 137mm Length: ~370 mm Width: ~171 mm Wall thic
이 디자인은 Sketchfab에서 호스팅됩니다. 파일은 표시된 라이선스에 따라 해당 사이트에서 다운로드됩니다.
| 라이선스 | CC BY |
|---|---|
| 출처 | Sketchfab |
| 디자이너 | Actioncars3d |
| 저작자 표시 | Actioncars3d on Sketchfab · CC-BY 4.0 (attribution required) · Attribution required |
| 태그 | rc, printable, toycar, rccar, bodyshell, suzukiignis, rcshell |
Suzuki Ignis 1:10 Scale RC Body Shell (3D Printable STL)
This custom Suzuki Ignis body shell is designed with clean topology and optimized wall sections specifically for 3D printing and RC mounting.
Scale & Technical Specifications
Scale: 1:10
Height: 137mm
Length: ~370 mm
Width: ~171 mm
Wall thickness: ~2.5 mm
M-Chassis & Custom Friendly: Perfectly sized for short wheelbase / Mini (M-chassis) setups or custom RC builds.
Layer Height: 0.2 mm (0.12–0.16 mm for smoother exterior resolution)
Infill: 15% – 20% (Gyroid or Grid recommended for durability)
Wall Loops / Perimeter: 3 to 4 walls for maximum structural rigidity against crashes
Material: PETG or ABS/ASA (Recommended for impact resistance); PLA (Great for display or light driving)
Supports: Tree supports enabled (touching build plate)
Commercial Rights: Re-distribution or sale of digital files is strictly prohibited. (If offering physical prints, specify your commercial terms here).
https://buymeacoffee.com/actioncars3d
디자인을 공개하세요
앱에서 STL, 3MF 또는 OBJ 파일을 업로드하세요. 모든 업로드는 여기에 표시되기 전에 검토되며, 유료 판매 금액의 80%는 디자이너에게 돌아갑니다.