#4-48 UNF thread pitch and dimensions

The #4-48 UNF thread has 48 threads per inch, a pitch of 0.0208 in (0.53 mm), on a 0.112 in major diameter (ASME B1.1). Its basic pitch diameter is 0.0985 in and its basic minor diameter is 0.0894 in.

Threads per inch (UNF)

48 TPI

pitch 0.0208 in · 0.53 mm

Major diameter (D)

0.112 in (2.84 mm)

Pitch (1 / TPI)

0.0208 in (0.53 mm)

Basic pitch diameter (E)

0.0985 in (2.5 mm)

Basic minor diameter (internal)

0.0894 in (2.27 mm)

Tensile stress area (As)

0.0066 in² (4.3 mm²)

Tap drill (75% chart)

#42 (0.0935 in)

Need it made?

Need a part with #4-48 UNF threads machined? Post it free — local makers quote.

Post the job free → Browse makers in this field: CNC machining →

Got the machine? Sell your time on The Spool List. Join as a maker

#4-48 UNF basic dimensions (ASME B1.1)
Dimension	Formula	inch	mm
Major diameter D	nominal	0.1120	2.84
Pitch P	1 / TPI	0.0208	0.53
Pitch diameter E	D − 0.649519 / n	0.0985	2.5
Minor diameter (internal)	D − 1.082532 / n	0.0894	2.27
Thread height (basic)	0.541266 / n	0.0113	0.29
Tensile stress area As	0.7854 (D − 0.9743 / n)²	0.0066 in²	4.3 mm²

#4 threads: UNC vs UNF
Thread	TPI	Pitch Ø E	Stress area As	Tap drill
#4-40 UNC	40	0.0958 in	0.0060 in²	#43
#4-48 UNF (this page)	48	0.0985 in	0.0066 in²	#42

Neighbouring UNF threads
Thread	TPI	Pitch (mm)	Minor Ø	Stress area As
#4-48 UNF (this page)	48	0.53	0.0894 in	0.0066 in²
#6-40 UNF	40	0.64	0.1109 in	0.0101 in²
#8-36 UNF	36	0.71	0.1339 in	0.0147 in²
#10-32 UNF	32	0.79	0.1562 in	0.0200 in²
1/4-28 UNF	28	0.91	0.2113 in	0.0364 in²

Practical notes

Unified threads are named diameter–TPI–series: #4-48 UNF is a #4 nominal diameter (number 4 screw, 0.112 in) with 48 threads per inch in the fine series.

These are basic (zero-tolerance) dimensions. Most screws are made to class 2A and nuts to 2B (ASME B1.1), so measured sizes sit slightly below the basic values on the screw.

48 TPI is a pitch of 0.53 mm, which does not match a metric ISO pitch exactly; metric and Unified fasteners of similar size are not interchangeable.

Tensile stress area As is the area used for bolt strength (proof load = As × proof stress for the SAE J429 or ASTM grade). For #4-48 UNF it is 0.0066 in².

FAQ

How many threads per inch is #4-48 UNF?

48 TPI, a pitch of 0.0208 in (0.53 mm), in the Unified fine series (ASME B1.1).

What is the minor diameter of #4-48 UNF?

The basic minor diameter of the internal thread is D − 1.082532/n = 0.0894 in (2.27 mm).

What is the tensile stress area of #4-48 UNF?

As = 0.7854 × (D − 0.9743/n)² = 0.0066 in² (4.3 mm²).

What tap drill does #4-48 UNF need?

The standard chart drill is #42, 0.0935 in (2.37 mm), about 68% thread.

What is the difference between #4-48 UNF and #4-40 UNC?

Same #4 diameter, different pitch: 48 TPI versus 40 TPI. They are not interchangeable.

Sources: ASME B1.1 — Unified inch screw threads (UN and UNR thread form): basic dimensions, tensile stress area · ASME B18.2.1 — square, hex, heavy hex and askew head bolts and hex, heavy hex, hex flange screws (width across flats)

Find a maker

Post the job free — verified makers quote you.

Post a CNC machining job Open the Thread Pitch & Dimensions Chart calculator