26 gauge galvanized steel thickness
26 gauge galvanized steel is 0.0217 in (0.55 mm) thick, per the galvanized sheet gauge. The same gauge number means a different thickness in other metals: steel 0.0179 in.
Need it made?
Need 26 gauge galvanized steel parts cut, bent or welded? Post it free — local makers quote.
Got the machine? Sell your time on The Spool List. Join as a maker
| Material | Gauge standard | Thickness (in) | Thickness (mm) | kg/m² |
|---|---|---|---|---|
| Steel | Manufacturers' Standard Gauge | 0.0179 | 0.45 | 3.57 |
| Galvanized steel (this page) | galvanized sheet gauge | 0.0217 | 0.55 | 4.33 |
| Gauge | Thickness (in) | Thickness (mm) | kg/m² | lb/ft² |
|---|---|---|---|---|
| 14 ga | 0.0785 | 1.99 | 15.65 | 3.21 |
| 16 ga | 0.0635 | 1.61 | 12.66 | 2.59 |
| 18 ga | 0.0516 | 1.31 | 10.29 | 2.11 |
| 20 ga | 0.0396 | 1.01 | 7.90 | 1.62 |
| 22 ga | 0.0336 | 0.85 | 6.70 | 1.37 |
| 24 ga | 0.0276 | 0.70 | 5.50 | 1.13 |
| 26 ga (this page) | 0.0217 | 0.55 | 4.33 | 0.89 |
Practical notes
Gauge is a convention, not a unit: a higher gauge number is thinner, and steps are not even. 26 gauge is 0.0217 in for hot-dip galvanized steel sheet (thickness includes the zinc coating), but steel 0.0179 in. Put the decimal thickness on drawings and purchase orders to avoid mix-ups.
Mills supply sheet to a thickness tolerance (ASTM A568 / A480 / EN 10131), so a measured sheet can be a few thousandths of an inch off the nominal value. Measure with a micrometer before calculating bend allowances or press-fit clearances.
Weight per area here is thickness × density (steel, 7.85 g/cm³, applied to the coated thickness): 0.55 mm × 7.85 = 4.33 kg/m². Multiply by the sheet area for blank weight; a 4 × 8 ft sheet is 2.973 m², so about 12.9 kg (28.4 lb).
Galvanized gauge thickness includes the zinc layer, which is why 26 ga galvanized (0.0217 in) is thicker than uncoated 26 ga steel (0.0179 in).
FAQ
How thick is 26 gauge galvanized steel?
0.0217 in, which is 0.55 mm, per the galvanized sheet gauge.
How thick is 26 gauge in mm?
For galvanized steel, 26 gauge is 0.55 mm. In other metals: steel 0.45 mm.
How much does 26 gauge galvanized steel weigh?
About 4.33 kg per square metre (0.89 lb per square foot), using steel, 7.85 g/cm³, applied to the coated thickness.
Is 26 gauge thicker than 24 gauge?
No. Higher gauge numbers are thinner: 24 ga galvanized steel is 0.0276 in, 26 ga is 0.0217 in.
Sources: Galvanized steel: galvanized sheet gauge · Densities: EN 10025 / ASTM A1008 (steel), ASTM A240 (stainless), Aluminum Association (5052) · 1 in = 25.4 mm (exact)
Find a maker
Post the job free — verified makers quote you.
Post a Metal fabrication job Open the Sheet Metal Gauge Chart calculator