22 gauge steel thickness
22 gauge steel is 0.0299 in (0.76 mm) thick, per the Manufacturers' Standard Gauge. The same gauge number means a different thickness in other metals: galvanized steel 0.0336 in, stainless steel 0.0312 in, aluminium 0.0253 in.
Need it made?
Need 22 gauge steel parts cut, bent or welded? Post it free — local makers quote.
Got the machine? Sell your time on The Spool List. Join as a maker
| Material | Gauge standard | Thickness (in) | Thickness (mm) | kg/m² |
|---|---|---|---|---|
| Steel (this page) | Manufacturers' Standard Gauge | 0.0299 | 0.76 | 5.96 |
| Galvanized steel | galvanized sheet gauge | 0.0336 | 0.85 | 6.70 |
| Stainless steel | U.S. Standard Gauge (stainless sheet chart) | 0.0312 | 0.79 | 6.28 |
| Aluminium | Brown & Sharpe (AWG) gauge | 0.0253 | 0.64 | 1.72 |
| Gauge | Thickness (in) | Thickness (mm) | kg/m² | lb/ft² |
|---|---|---|---|---|
| 16 ga | 0.0598 | 1.52 | 11.92 | 2.44 |
| 18 ga | 0.0478 | 1.21 | 9.53 | 1.95 |
| 20 ga | 0.0359 | 0.91 | 7.16 | 1.47 |
| 22 ga (this page) | 0.0299 | 0.76 | 5.96 | 1.22 |
| 24 ga | 0.0239 | 0.61 | 4.77 | 0.98 |
| 26 ga | 0.0179 | 0.45 | 3.57 | 0.73 |
| 28 ga | 0.0149 | 0.38 | 2.97 | 0.61 |
Practical notes
Gauge is a convention, not a unit: a higher gauge number is thinner, and steps are not even. 22 gauge is 0.0299 in for uncoated carbon steel (cold-rolled / hot-rolled sheet), but galvanized steel 0.0336 in, stainless steel 0.0312 in and aluminium 0.0253 in. Put the decimal thickness on drawings and purchase orders to avoid mix-ups.
Mills supply sheet to a thickness tolerance (ASTM A568 / A480 / EN 10131), so a measured sheet can be a few thousandths of an inch off the nominal value. Measure with a micrometer before calculating bend allowances or press-fit clearances.
Weight per area here is thickness × density (carbon steel, 7.85 g/cm³): 0.76 mm × 7.85 = 5.96 kg/m². Multiply by the sheet area for blank weight; a 4 × 8 ft sheet is 2.973 m², so about 17.7 kg (39.1 lb).
Manufacturers' Standard Gauge is based on a steel weight of 41.82 lb/ft² per inch of thickness, which is why its decimal values look irregular.
FAQ
How thick is 22 gauge steel?
0.0299 in, which is 0.76 mm, per the Manufacturers' Standard Gauge.
How thick is 22 gauge in mm?
For steel, 22 gauge is 0.76 mm. In other metals: galvanized steel 0.85 mm, stainless steel 0.79 mm, aluminium 0.64 mm.
How much does 22 gauge steel weigh?
About 5.96 kg per square metre (1.22 lb per square foot), using carbon steel, 7.85 g/cm³.
Is 22 gauge thicker than 20 gauge?
No. Higher gauge numbers are thinner: 20 ga steel is 0.0359 in, 22 ga is 0.0299 in.
Sources: Steel: Manufacturers' Standard Gauge · Densities: EN 10025 / ASTM A1008 (steel), ASTM A240 (stainless), Aluminum Association (5052) · 1 in = 25.4 mm (exact)
Find a maker
Post the job free — verified makers quote you.
Post a Metal fabrication job Open the Sheet Metal Gauge Chart calculator