12 gauge aluminium thickness
12 gauge aluminium is 0.0808 in (2.05 mm) thick, per the Brown & Sharpe (AWG) gauge. The same gauge number means a different thickness in other metals: steel 0.1046 in, galvanized steel 0.1084 in, stainless steel 0.1094 in.
Need it made?
Need 12 gauge aluminium parts cut, bent or welded? Post it free — local makers quote.
Got the machine? Sell your time on The Spool List. Join as a maker
| Material | Gauge standard | Thickness (in) | Thickness (mm) | kg/m² |
|---|---|---|---|---|
| Steel | Manufacturers' Standard Gauge | 0.1046 | 2.66 | 20.86 |
| Galvanized steel | galvanized sheet gauge | 0.1084 | 2.75 | 21.61 |
| Stainless steel | U.S. Standard Gauge (stainless sheet chart) | 0.1094 | 2.78 | 22.04 |
| Aluminium (this page) | Brown & Sharpe (AWG) gauge | 0.0808 | 2.05 | 5.50 |
| Gauge | Thickness (in) | Thickness (mm) | kg/m² | lb/ft² |
|---|---|---|---|---|
| 8 ga | 0.1285 | 3.26 | 8.75 | 1.79 |
| 10 ga | 0.1019 | 2.59 | 6.94 | 1.42 |
| 12 ga (this page) | 0.0808 | 2.05 | 5.50 | 1.13 |
| 14 ga | 0.0641 | 1.63 | 4.36 | 0.89 |
| 16 ga | 0.0508 | 1.29 | 3.46 | 0.71 |
| 18 ga | 0.0403 | 1.02 | 2.74 | 0.56 |
| 20 ga | 0.0320 | 0.81 | 2.18 | 0.45 |
Practical notes
Gauge is a convention, not a unit: a higher gauge number is thinner, and steps are not even. 12 gauge is 0.0808 in for aluminium (aluminum) sheet, but steel 0.1046 in, galvanized steel 0.1084 in and stainless steel 0.1094 in. Put the decimal thickness on drawings and purchase orders to avoid mix-ups.
Aluminium sheet is usually ordered by decimal thickness (e.g. 0.063 in, 1.6 mm) rather than gauge. Measure with a micrometer before calculating bend allowances or press-fit clearances.
Weight per area here is thickness × density (5052 aluminium, 2.68 g/cm³): 2.05 mm × 2.68 = 5.50 kg/m². Multiply by the sheet area for blank weight; a 4 × 8 ft sheet is 2.973 m², so about 16.4 kg (36.0 lb).
Aluminium uses the Brown & Sharpe scale, the same numbers as AWG wire, which runs thinner than steel gauges at the same number.
FAQ
How thick is 12 gauge aluminium?
0.0808 in, which is 2.05 mm, per the Brown & Sharpe (AWG) gauge.
How thick is 12 gauge in mm?
For aluminium, 12 gauge is 2.05 mm. In other metals: steel 2.66 mm, galvanized steel 2.75 mm, stainless steel 2.78 mm.
How much does 12 gauge aluminium weigh?
About 5.50 kg per square metre (1.13 lb per square foot), using 5052 aluminium, 2.68 g/cm³.
Is 12 gauge thicker than 10 gauge?
No. Higher gauge numbers are thinner: 10 ga aluminium is 0.1019 in, 12 ga is 0.0808 in.
Sources: Aluminium: Brown & Sharpe (AWG) gauge · Densities: EN 10025 / ASTM A1008 (steel), ASTM A240 (stainless), Aluminum Association (5052) · 1 in = 25.4 mm (exact)
Find a maker
Post the job free — verified makers quote you.
Post a Metal fabrication job Open the Sheet Metal Gauge Chart calculator