The Spool List
Orange Bracket Mushroom, Kiri

Biblioteka projektów

Orange Bracket Mushroom, Kiri

autor: Shockwave-Rider

Za darmoCC BYSketchfab

Scanned on a badger sett survey in two phases. The first phase was outbound when I first spotted this mushroom. I scanned it with RealityScan mobile using ancient Motorola Moto g(7) power. The second phase was inbound back to our cars. We do not always use the same route back. I used the camera on m

Ten projekt jest hostowany w Sketchfab. Pliki pobiera się stamtąd, na podanej licencji.

LicencjaCC BY
ŹródłoSketchfab
ProjektantShockwave-Rider
Uznanie autorstwaShockwave-Rider on Sketchfab · CC-BY 4.0 (attribution required) · Attribution required
Scanned on a badger sett survey in two phases. The first phase was outbound when I first spotted this mushroom. I scanned it with RealityScan mobile using ancient Motorola Moto g(7) power. The second phase was inbound back to our cars. We do not always use the same route back. I used the camera on my other old budget phone a Motorola g24. The weather was overcast, with periods of light drizzle or rain. Yippee! Rain, finally, after a summer of drought. So light was not brilliant, especially outbound. The mushroom was low down on an Oak tree, next to a footpath, next to a large field. So at least I didn't have to struggle with really low light conditions caused by being surrounded by trees. Both sets of images were copied to my laptap, then uploaded together to Kiri Engine to render into a 3D model. A brief bit of editing in blender followed to remove some purious artifacts.

Wszystkie projekty

Opublikuj swoje projekty

Prześlij pliki STL, 3MF lub OBJ w aplikacji. Każdy plik jest sprawdzany, zanim pojawi się tutaj, a projektanci zachowują 80% z każdej płatnej sprzedaży.

Pobierz aplikację