Designbibliothek
Orange Bracket Mushroom, Kiri
von Shockwave-Rider
KostenlosCC BYSketchfab
Scanned on a badger sett survey in two phases. The first phase was outbound when I first spotted this mushroom. I scanned it with RealityScan mobile using ancient Motorola Moto g(7) power. The second phase was inbound back to our cars. We do not always use the same route back. I used the camera on m
Dieses Design wird auf Sketchfab gehostet. Die Dateien werden dort unter der angegebenen Lizenz heruntergeladen.
| Lizenz | CC BY |
|---|---|
| Quelle | Sketchfab |
| Designer | Shockwave-Rider |
| Namensnennung | Shockwave-Rider on Sketchfab · CC-BY 4.0 (attribution required) · Attribution required |
Scanned on a badger sett survey in two phases. The first phase was outbound when I first spotted this mushroom. I scanned it with RealityScan mobile using ancient Motorola Moto g(7) power. The second phase was inbound back to our cars. We do not always use the same route back. I used the camera on my other old budget phone a Motorola g24.
The weather was overcast, with periods of light drizzle or rain. Yippee! Rain, finally, after a summer of drought. So light was not brilliant, especially outbound. The mushroom was low down on an Oak tree, next to a footpath, next to a large field. So at least I didn't have to struggle with really low light conditions caused by being surrounded by trees.
Both sets of images were copied to my laptap, then uploaded together to Kiri Engine to render into a 3D model. A brief bit of editing in blender followed to remove some purious artifacts.
Veröffentliche deine Designs
Lade STL-, 3MF- oder OBJ-Dateien in der App hoch. Jeder Upload wird geprüft, bevor er hier erscheint, und Designer behalten 80 % jedes bezahlten Verkaufs.