M6 thread pitch and dimensions
The M6 thread pitch is 1.0 mm (ISO 261 coarse), about 25.4 threads per inch. Its basic pitch diameter is 5.350 mm and its minor diameter is 4.917 mm in the nut and 4.773 mm on the bolt (ISO 724 / ISO 898-1).
Need it made?
Need a part with M6 x 1.0 threads machined? Post it free — local makers quote.
Got the machine? Sell your time on The Spool List. Join as a maker
| Dimension | Formula | mm | inch |
|---|---|---|---|
| Major diameter d | nominal | 6.000 | 0.2362 |
| Pitch P | ISO 261 | 1.000 | 0.0394 |
| Pitch diameter d2 | d − 0.649519 P | 5.350 | 0.2106 |
| Minor diameter D1 (nut) | d − 1.082532 P | 4.917 | 0.1936 |
| Minor diameter d3 (bolt) | d − 1.226869 P | 4.773 | 0.1879 |
| Fundamental triangle H | 0.866025 P | 0.866 | 0.0341 |
| Thread overlap H1 | 0.541266 P | 0.541 | 0.0213 |
| Thread | Pitch | Series | Pitch Ø d2 | Stress area As | Tap drill |
|---|---|---|---|---|---|
| M6 x 1.0 (this page) | 1.0 mm | coarse | 5.350 mm | 20.1 mm² | 5.0 mm |
| Thread | Pitch | Minor Ø nut D1 | Stress area As | Hex AF |
|---|---|---|---|---|
| M4 x 0.7 | 0.7 mm | 3.242 mm | 8.8 mm² | 7.0 mm |
| M5 x 0.8 | 0.8 mm | 4.134 mm | 14.2 mm² | 8.0 mm |
| M6 x 1.0 (this page) | 1.0 mm | 4.917 mm | 20.1 mm² | 10.0 mm |
| M8 x 1.25 | 1.25 mm | 6.647 mm | 36.6 mm² | 13.0 mm |
| M10 x 1.5 | 1.5 mm | 8.376 mm | 58.0 mm² | 16.0 mm |
Practical notes
Metric threads are named by major diameter and pitch: M6 x 1.0 means a 6 mm nominal diameter with 1.0 mm between crests. When no pitch is written (just "M6"), the ISO 261 coarse pitch is meant.
The pitch diameter and minor diameters above are basic (zero-tolerance) sizes. Real nuts and bolts are made to a tolerance class, usually 6H for the nut and 6g for the bolt (ISO 965), so a measured bolt is slightly under these values.
To identify a thread, measure the major diameter with calipers and the pitch with a thread gauge, or count crests over 10 mm. M6 x 1.0 has about 25.4 threads per inch, which is close to, but not the same as, any Unified thread; an inch nut will not run on it.
Tensile stress area As is what bolt strength is calculated on (proof load = As × proof stress for the property class in ISO 898-1). For M6 x 1.0 it is 20.1 mm².
FAQ
What is the pitch of an M6 thread?
The standard (coarse) pitch of M6 is 1.0 mm per ISO 261.
What is the minor diameter of M6 x 1.0?
The basic minor diameter is 4.917 mm for the internal thread (nut, D1 = d − 1.082532 P) and 4.773 mm for the external thread (bolt, d3 = d − 1.226869 P).
What is the tensile stress area of M6 x 1.0?
As = π/4 × ((d2 + d3)/2)² = 20.1 mm² for M6 x 1.0 (ISO 898-1).
What tap drill does M6 x 1.0 need?
5.0 mm for a cut tap (major diameter minus pitch, ISO 2306), which gives about 77% thread.
What spanner size fits an M6 bolt?
ISO 4032 nuts and ISO 4014/4017 bolts in M6 are 10.0 mm across flats. Older DIN 934/933 parts can differ at M10, M12, M14 and M22.
Sources: ISO 261 — ISO general purpose metric screw threads, general plan (pitch series) · ISO 724 — ISO general purpose metric screw threads, basic dimensions · ISO 898-1 — mechanical properties of fasteners (minor diameter d3, tensile stress area As) · ISO 4032 / ISO 4014 — hexagon nuts and bolts (width across flats)
Find a maker
Post the job free — verified makers quote you.
Post a CNC machining job Open the Thread Pitch & Dimensions Chart calculator