5/8-11 UNC thread pitch and dimensions
The 5/8-11 UNC thread has 11 threads per inch, a pitch of 0.0909 in (2.31 mm), on a 0.625 in major diameter (ASME B1.1). Its basic pitch diameter is 0.5660 in and its basic minor diameter is 0.5266 in.
Need it made?
Need a part with 5/8-11 UNC threads machined? Post it free — local makers quote.
Got the machine? Sell your time on The Spool List. Join as a maker
| Dimension | Formula | inch | mm |
|---|---|---|---|
| Major diameter D | nominal | 0.6250 | 15.88 |
| Pitch P | 1 / TPI | 0.0909 | 2.31 |
| Pitch diameter E | D − 0.649519 / n | 0.5660 | 14.38 |
| Minor diameter (internal) | D − 1.082532 / n | 0.5266 | 13.38 |
| Thread height (basic) | 0.541266 / n | 0.0492 | 1.25 |
| Tensile stress area As | 0.7854 (D − 0.9743 / n)² | 0.2260 in² | 146 mm² |
| Thread | TPI | Pitch Ø E | Stress area As | Tap drill |
|---|---|---|---|---|
| 5/8-11 UNC (this page) | 11 | 0.5660 in | 0.2260 in² | 17/32" |
| 5/8-18 UNF | 18 | 0.5889 in | 0.2560 in² | 37/64" |
| Thread | TPI | Pitch (mm) | Minor Ø | Stress area As |
|---|---|---|---|---|
| 7/16-14 UNC | 14 | 1.81 | 0.3602 in | 0.1063 in² |
| 1/2-13 UNC | 13 | 1.95 | 0.4167 in | 0.1419 in² |
| 5/8-11 UNC (this page) | 11 | 2.31 | 0.5266 in | 0.2260 in² |
| 3/4-10 UNC | 10 | 2.54 | 0.6417 in | 0.3345 in² |
| 1"-8 UNC | 8 | 3.18 | 0.8647 in | 0.6057 in² |
Practical notes
Unified threads are named diameter–TPI–series: 5/8-11 UNC is a 5/8 nominal diameter with 11 threads per inch in the coarse series.
These are basic (zero-tolerance) dimensions. Most screws are made to class 2A and nuts to 2B (ASME B1.1), so measured sizes sit slightly below the basic values on the screw.
11 TPI is a pitch of 2.31 mm, which does not match a metric ISO pitch exactly; metric and Unified fasteners of similar size are not interchangeable.
Tensile stress area As is the area used for bolt strength (proof load = As × proof stress for the SAE J429 or ASTM grade). For 5/8-11 UNC it is 0.2260 in².
FAQ
How many threads per inch is 5/8-11 UNC?
11 TPI, a pitch of 0.0909 in (2.31 mm), in the Unified coarse series (ASME B1.1).
What is the minor diameter of 5/8-11 UNC?
The basic minor diameter of the internal thread is D − 1.082532/n = 0.5266 in (13.38 mm).
What is the tensile stress area of 5/8-11 UNC?
As = 0.7854 × (D − 0.9743/n)² = 0.2260 in² (146 mm²).
What tap drill does 5/8-11 UNC need?
The standard chart drill is 17/32", 0.5313 in (13.49 mm), about 79% thread.
What is the difference between 5/8-11 UNC and 5/8-18 UNF?
Same 5/8 diameter, different pitch: 11 TPI versus 18 TPI. They are not interchangeable.
Sources: ASME B1.1 — Unified inch screw threads (UN and UNR thread form): basic dimensions, tensile stress area · ASME B18.2.1 — square, hex, heavy hex and askew head bolts and hex, heavy hex, hex flange screws (width across flats)
Find a maker
Post the job free — verified makers quote you.
Post a Metal fabrication job Open the Thread Pitch & Dimensions Chart calculator