Designbibliotek
24mm Conduit Clamp, Cable Clip Holder | Free STL
av HardLine
GratisCC BYSketchfab
Simple holder for 24 mm corrugated conduit . Easy to print and designed for a 0.4 mm nozzle. Dimensions: 50 × 30 × 12 mm Conduit: 24 mm (actual diameter approx. 23 mm) Nozzle: 0.4 mm Top/Bottom: Personaly i woud print with Concentric pattern Supports: Not needed If you print it, feel free to leav
Den här designen finns på Sketchfab. Filerna laddas ner därifrån under den angivna licensen.
| Licens | CC BY |
|---|---|
| Källa | Sketchfab |
| Designer | HardLine |
| Erkännande | HardLine on Sketchfab · CC-BY 4.0 (attribution required) · Attribution required |
| Taggar | stl, office, clamp, printing, mount, printer, desk, holder, diy, file, clip, corrugated |
Simple holder for 24 mm corrugated conduit .
Easy to print and designed for a 0.4 mm nozzle.
Dimensions: 50 × 30 × 12 mm
Conduit: 24 mm (actual diameter approx. 23 mm)
Nozzle: 0.4 mm
Top/Bottom: Personaly i woud print with Concentric pattern
Supports: Not needed
If you print it, feel free to leave a comment! 😁
Publicera din design
Ladda upp STL-, 3MF- eller OBJ-filer i appen. Varje uppladdning granskas innan den visas här, och designers behåller 80 % av varje betald försäljning.