디자인 라이브러리
Low Poly 3D Model of Small Black Powerbank
fairuzkamil2 제작
무료CC BYSketchfab
A Simple Low Poly 3D Model of Small Black Powerbank With USB A and C With Length of 14 cm Spec: Length: 14 cm Width: 6.6 cm Thickness: 1.5 cm Note: The texture for the USB A and C is made by incrediblephoto from https://www.shutterstock.com/. The USB ports image have been processed with AI to remo
이 디자인은 Sketchfab에서 호스팅됩니다. 파일은 표시된 라이선스에 따라 해당 사이트에서 다운로드됩니다.
| 라이선스 | CC BY |
|---|---|
| 출처 | Sketchfab |
| 디자이너 | fairuzkamil2 |
| 저작자 표시 | fairuzkamil2 on Sketchfab · CC-BY 4.0 (attribution required) · Attribution required |
| 태그 | gadget, small, powerbank, charger, battery, electronic, electronics, phone, 3d-model, usb-c, low-poly-model, lowpolymodel |
A Simple Low Poly 3D Model of Small Black Powerbank With USB A and C With Length of 14 cm
Spec:
Length: 14 cm
Width: 6.6 cm
Thickness: 1.5 cm
Note:
The texture for the USB A and C is made by incrediblephoto from https://www.shutterstock.com/. The USB ports image have been processed with AI to remove their backgrounds into blank and cropped individually as separate USB-A and USB-C images. The two ports then is placed onto the model using blender via shrinkwrap modifiers.
Unfortunately, I cannot accurately model that power bank because I'm unable to solve the complex bevel issue. The resulting model became quite more boxy than I prefer. I also still yet to learn a better implementation of texturing because this implementation here is kinda poor. I also apologized for low resolution on the texture because I don't have premium account for Shutterstock.
디자인을 공개하세요
앱에서 STL, 3MF 또는 OBJ 파일을 업로드하세요. 모든 업로드는 여기에 표시되기 전에 검토되며, 유료 판매 금액의 80%는 디자이너에게 돌아갑니다.